Main In Stock Order About FAQ Contact

Canada's Number One Airsoft Supplier

SEARCH
Like us! 
 Contact
 Bookmark
 = Categories =
  Electric Guns
  Gas Guns
  Spring Guns
  Magazines
  Consumables
  Optics and Illuminations
  External Parts
  Internal Parts
  Accessories
  Silencers
  Combat Gear
  Launchers / Grenades

 = Brands =

 = Viewed =

MAXX CNC M4 Hop Up Chamber ME Pro

 = Best Sellers =

DOS Green Gas (1100mL)
$16.99

Open Item (Ares AS-02)
$274.99

DOS 0.25g Biodegradable Premium BBs
$24.99

DOS 0.20g Premium BBs
$19.99

 = Policies =
  In Stock
  Specials
  F. A. Q.
  LEGALITY
  About Us
  Price Match
  Warranty
  Privacy
  Disclaimer
  Repair/Support
  Contact Us
  Site Map

Home  >>  Internal Parts  >>  For Electric Guns  >>  MAXX CNC M4 Hop Up Chamber ME Pro
Click image to enlarge
MAXX CNC M4 Hop Up Chamber ME Pro
Manufacturer : Maxx Model Products
Price :
SKU # : #80187
In Stock : More than 5
Rating : Not yet rated
   
 


  • Description
  • More Images
  • Comments

PRODUCT INFORMATION

 

CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series. 
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot. 
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs. 
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore. 
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand. 

***The UV LED Tracer and Electronic Module are optional add-ons to glow BBs in the dark. Operating Voltage from 7VDC - 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately) 
***The Empty Magazine Detection Sensor and Electronic Switch Controller are optional add-ons to stop Motor/HPA firing when the magazine is empty. (Sold separately) 
***Test results: FPS might be increased from 10FPS to 30FPS over stock setup. Please check your FPS!

 

  Includes
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit
2 x Strong Clear Vinyl Cover
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

  Specification
Overall Length: 51mm
Overall Height: 37.75mm
Hub Outer Diameter (to fit into Gear Box): min 11mm - max 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

  Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Accepted the nozzle length from 21.00mm to 21.25mm
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with any V2 gear boxes with 11mm or 11.5mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
The UV LED Tracer and Electronic Module to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

  Weight
N/A grams

 

  Usage
Compatible with most Tokyo Marui (include KRYTAC, except KWA) M4/M16 standard AEG version 2 gear box

 

  Requires
Wearing eye protection is recommended
Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
Bearing lubricant oil/grease is recommended for smooth operation

 

  Instruction
Instruction Manuals are included

 

Tokyo Marui® is a registered trademark of Tokyo Marui Co., Ltd. 
KRYTAC® is a registered trademark of KRISS Systems SA in the U.S. and other countries. 
KWA® is a registered trademark of KWA Performance Industries, Inc.

There are no comments for this product at this time.
 = My Cart =

Items in cart :
Subtotal :

View Cart


 = My Account =

Log in/Sign up to view
account details.
 

 = Specials =

SS P226 Mag (24rd) FINAL SALE
$34.99 -> $19.99

 = Featured =

KWC Colt Python .357 Magnum Revolver 4 inch
$149.99

SHI M72 A7 Rocket Launcher
$399.99

S&T E11 Blaster Rifle
$624.99

SRC AK47 Tac Gen III Pro
$454.99

Copyright ©  by 007 Airsoft. All rights reserved.                     Development by Dark Knight Enterprises